Xell Canadian Standard Freeness Tester – Digital Model

Enjoy Your Digital Freedom

Device Description

The XELL Canadian Standard Freeness Tester consists of a sturdy frame with built in balance and 10″ touch screen. Mounted on this frame is the 1.000 ml cylinder with a special screen plate. Also mounted on the frame is a funnel, which guides the water from the upper cylinder into a beaker, which is permanently weighed. If water splashes out of the cylinder into the funnel and the beaker, the beaker gives the actual current weight in real time. A curve of the increase in weight is determined and shown on the touch screen.

Test Description »digital«

The sample is prepared acc. the standard and the suspension is filled into the upper cylinder, while the bottom lid is closed. The upper lid is closed. The lower lid is opened and due to opening a magnetic valve on the upper lid, air comes into the cylinder and allows to start the drainage. The water drains through the sieve and the pulp is held back on the sieve. The drained water is measured with the built in balance and the curve is detected. The device calculates all the statistics (mean, min, max, standard deviation, etc.) and displays them on the 10″ display. The instrument stores the last 1  000 measurements which can be retrieved or transferred to a PC even after some months. From the front USB port the values can be stored to a USB-stick and converted into Excel format.


  • 10″ touch screen with LabUI™ (see page <?>)
  • Start of automatic process with a button on the touch screen
  • Automatic determination of the drainage curve
  • Stainless steel construction of the frame with built-in balance


  • USB-Port on the front, where the measurement can be taken onto a USB-stick
  • USB-Port and Ethernet-port on the back, where the data can be transported via cable to a laboratory computer in Excel format (as standard format)

Delivery content:

  • Instrument
  • Electrical connection cable and USB cable
  • Two measuring cylinders
  • Operating manual


  • Electricity:        100 – 240 V, 50/60 Hz AC
  • Air:                  400 – 600 Pa

Weight and Dimensions



For measuring the freeness of pulp acc. Canadian Standard yet fully digital feat. LabUI.

Product code:
ISO 5267-2, TAPPI T 227, SCAN C21/M4
Electricity: 100 – 240 V, 50/60 Hz AC
Air: 400–600 kPa
Data transfer: 2 USB-Ports and 1 Ethernet.



quotation Request quotation for this product