Static Friction Tester



Device Description

The instrument consists of a frame with a moveable table. The quick clamping tool, mounted on the table allows to fix the test paper sample. A metal block on which lower side is glued another test paper is put on the sample. The metal block is fixed on the right side of the table and controlled by a sensor. When the table starts moving – the metal block starts to move on a specific angle. This angle is measured and displayed in the digital display of the instrument.

 

Test Description

The sample is clamped with the quick clamping tool on the moveable table. The metal block with the other paper on it is put on the sample. The test starts by pushing the start-button. The table moves slowly. Suddenly the metal block starts to move downwards. The instrument stop at this position and the angle is displayed.

 

Specifications

– Different metal blocks are available (see Optional)
– Standard block “A” with 2,0 x 4,0” / 750 g / 14,5 g/cm² (is delivered as standard)

 

Shipment

– Static Friction Tester with standard block “A”
– Connection cable
– Operation manual

 

Optional
– Block “B” with 3,5 x 4,0” / 1.260 g / 14,0 g/cm²
– Block “C” with 1,5 x 3,5” / 500 g / 14,76 g/cm²
– Block “D with 2,5 x 2,5” / 200 g / 4,96 g/cm²
– Special blocks customer specified

 

Models

Article code Model
11.303.901Static Friction Tester

Overview

For measuring the static friction coefficient between 2 materials.

Product code:
11.303
Standards:
TAPPI T 503, TAPPI T815, TAPPI T549, ASTM D 202
Connections:
Electricity: 110 – 230 V 50/60 Hz AC

Scope

Quotation

quotation Request quotation for this product