Sample Punch Pneumatic

Device Description

Our Sample Punch Pneumatic is a sturdy punch pneumatically operated for easy and rapid preparation of square or circular test pieces. Either used for grammage determination or as sample preparation for bending/stiffness, Elmendorf tear or for twin folding tests. Grammage range from 30 up to 1000 g/m² and thickness up to max. 4 mm.

Procedure Description

The sample is placed between the punch knives through the slot in the safety cover. The sample piece is punched out pneumatically by using the button on top of the instrument.

The sample pieces fall into a sample piece collection tray, which is placed in the foot of the instrument. From there the samples can be taken out and used for several tests.

Connection

6 mm diameter pneumatic tube for compressed air connection (400–600 kPa)

Models

Article CodeRelated DeviceRelated StandardSample Sizes
Article CodeRelated DeviceRelated StandardSample Sizes
51.105.100ElmendorfISO 197450 × 63 mm
51.105.110ElmendorfISO 197476 × 63 mm
51.105.120ElmendorfTAPPI T41453 × 63 mm
51.105.160Elmendorfn/a63 × 63 mm
51.105.200Bending Stiffness TesterISO 249338 × 80 mm
51.105.210Bending Stiffness TesterTAPPI T55638 × 76 mm
51.105.300Twin FolderISO 5626100 × 15 mm
51.105.400GrammageISO 536100 cm² (round)
Other customised sample sizes are available! Please ask your distributor for info.

Overview

For the preparation of paper or board samples acc. to required standard.

Product code:
51.105.xxx
Standards:
Various Models of this device accord to following standards (on order make sure to pick the right model; see model table below): ISO 1974, ISO 2493, ISO 5626, ISO 536, TAPPI T414, TAPPI T556
Connections:
Air: 8mm hose (8 bar, 800kPa)

Scope

Quotation

quotation Request quotation for this product